#Quickslide sash windows install#
#Quickslide sash windows windows#

Your customer can increase the security of the sliding sash windows with travel restrictors, security bars and multiple sash locks. Although these windows can be designed to appear to be made of timber, the hard wearing nature of uPVC ensures that they will stay in excellent condition for years to come. These features include astragal bars, run through sash horns and authentic sash sections. In order to create a realistic timber appearance, these sliding sash windows retain the key features which were included in the original timber sash windows. With slim sightlines and hidden hardware, these windows will open up the building and offer uninterrupted views. These sliding sash windows can be customised with a variety of internal and external colour options to match the aesthetics of your customer’s property. With a smooth operating system, these windows contain a balanced load mechanism to allow the sash to be set at any height. Easily adaptable to your customer’s needs, these sliding sash windows can be slid up or down to meet their ventilation requirements. Pat yourself and the lads on the back.The Veka uPVC sash windows will make a sophisticated addition to any home or commercial property. Perform one last check to confirm everything works smoothly. Then fix all additional furniture on the window such as pole eyes or D handles if requested.

#Quickslide sash windows install#

Install internal and external trim on the bay poles and tidy around the window ensuring no gaps. Check the windows operate smoothly and correctly. Ensure they are level and that each is fitted perfectly. If you removed the sashes they may now be re-installed. Also fix through the sill, and ensure the bay pole covers the screws. Remove sash stop at the bottom and place a fixing screw and fix final fixing screws in the top of the window. Once all windows and bay poles are in place check all levels. When the bay pole and the frame adaptor are level, fix screws (45mm self-tappers) into the aluminium bay pole, one at the top and one at the bottom, then 500mm apart, fixing into the centre of the reinforcing on the window.Ĭheck the inside after fixing to see if the bay pole has moved. Ensure the frame adaptor is touching the inside lip of the outer frame. Before fixing any screws ensure the bay pole is centred all the way down the bay. Do not fix screws into the bay until the internal side is checked. When windows are level, attach the frame adaptor to the bay pole (make sure it is the opposite side to the frame adaptor that you have attached to the outer frame).Įnsure the ball and socket joint on the aluminium are in correctly. You may need to unscrew the fixing screws to level the windows (support the window if removing fixing screws!). Once all windows are in position, start with your highest point and use packers or 35mm architrave to pack the other windows to make all the windows level. Frame adaptors are not yet needed for the side windows. Repeat this process for the side windows also known as the returns. Remove the sash stops at the top and place two fixing screws to hold the window in place.

Throughout the process ensure the window is level, especially before fixing. Start by placing the middle bay into position, including packers under the outer frame. You should make sure that the screws don’t penetrate into the sash chambers (marked in red) as this can affect the function of the window.

Take extra care when screwing the adaptor to the frame. If it’s not touching the bay poles will not sit correctly later. Inspect the positioning of the frame adaptors make sure the adaptor is touching the outer frame where the lip is on the frame adaptor.

Use 25mm self-tapper screws, one at the top and one at the bottom, then 500mm apart. Before placing the windows into the bay, fit frame adaptors to both external sides of the middle bay. Now the sills are cut to the right angles you are almost ready to install. Place the window on its head, remove the sill, cut the angle of your bay and then re-attach the sill. Tip: remove one or both sashes to make the window lighter and easier to install. Also measure all corners of the bay just in case the angles are different. It’s vital that the angle is correct before cutting the sills on the windows.Īllow around 9mm for the bay posts, a measurement that may change due to the angle of your bay always measure before cutting the sill. With any variable degree bay post measure the angles for the sill. Bay posts come in two different variants: 90-degree and variable. When the aperture is ready, measure the angles for the sill.